xperiments-in xtouch issues

xperiments-in / xtouch

Other

720 stars 70 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Chrome Extension link shows as a virus

#180 theChef613 closed 1 hour ago
1
Your ESP32-S3 board is not supported.

#179 BillsWorkbench closed 9 hours ago
1
create provisioning. json

#178 tbc0309 opened 18 hours ago
2
My XTOUCH has started showing the message Missing provisioning.json

#177 Sebba1976 closed 1 day ago
15
Still Can't provision

#176 rubyredrick closed 2 days ago
3
Invalid BBL Cloud credentials

#175 WinstonLeWolf closed 2 days ago
12
Check your wifi credentials

#174 Fredzp1s closed 1 week ago
2
5 inch screen wont install?

#173 creasaptj2681 closed 1 week ago
1
Bambu Changed Auth_token format in China, China can't login since 2024.11.13, returns `Fatal BBL JWT parsing error`

#172 umeiko closed 2 days ago
19
not working since the last update

#171 poli27 closed 2 weeks ago
5
fix problem of cn login

#170 umeiko closed 2 weeks ago
0
The code I am getting is 6 digits. The local web interface that it directs me to only has spots for 5 characters. As a result I am getting "Invalid BBL Cloud Credentials"

#169 MisterTee8227 closed 2 weeks ago
0
Setup without BambuLab Account

#168 Mqxx closed 2 weeks ago
10
Installation failed

#167 iSuat closed 2 weeks ago
0
Message to go to http://(local ip) - which then asks for a Bambu Lab Verification Code

#166 Sebba1976 closed 2 weeks ago
5
China can't login after updated 20241105's version

#165 umeiko closed 2 weeks ago
19
Fatal BBL JWT parsing error

#164 FalcoVerus closed 3 weeks ago
17
Is it possible to generate the config locally?

#163 Dan-Ross closed 3 weeks ago
3
Wifi password cannot use “ … ” for ending.

#162 umeiko closed 3 weeks ago
0
WiFi password requirements

#161 JohnLinford closed 2 weeks ago
4
Failed building via platformIO: convert error

#160 umeiko closed 2 weeks ago
0
UI state incorrect for bed and tool head movement after switching tab / screen.

#159 TinyMito opened 3 months ago
0
After install blank screen

#158 jessejames87 closed 2 weeks ago
0
Touchscreen trouble,After installing, my xtouch does not respond to touch. It displays changes such as turning on the printer's light or changing the nozzle temperature, but I cannot control anything from the screen. The touch screen works and calibration can be performed. What this is about ?

#157 lukasz2194 closed 2 weeks ago
8
This error appears in the image. I did all the required steps and there is no solution. Some say that the card version is not supported.

#156 saifoo81 closed 3 weeks ago
3
Camera integration for spaghetti detection

#155 0xfde9 closed 4 months ago
1
Battery monitoring

#154 kubert96 closed 2 weeks ago
1
Could not connect to region locked P1S using LAN only mode

#153 WilliamLi564 closed 4 months ago
2
Add 5V LED control via ESP32 board.

#152 thias15 closed 4 months ago
1
Explain config.json format

#151 dayne closed 4 months ago
2
Support for LAN-Only

#150 TobyStoe closed 4 months ago
1
Black screen on reboot or power cycling

#149 kittyprime closed 2 weeks ago
1
Fatal BBLJWT parsing error

#148 Gandalf581 closed 4 months ago
2
Estimated time of availability instead of time left on the print

#147 btastic opened 4 months ago
0
Multiple OTA failures in a row

#146 reedy closed 4 months ago
1
Fatal BBLJWT parsing error loop

#145 reedy closed 4 months ago
1
Update?

#144 Arakon closed 5 months ago
0
Cannot update, not via OTA nor via file on the SD card

#143 riochicken closed 5 months ago
2
Again FATAL BBL JWT PARSING ERROR since today

#142 Sascha27 closed 5 months ago
3
Is the code Arduino IDE compatible?

#141 Ap1965 closed 5 months ago
1
Fatal BBLJWT parsing error since Jun 24, 2024

#140 Rubiksensei closed 5 months ago
4
Getting accessToken from Bambu Cloud Received error: 400 deserializeJson() failed: EmptyInput

#139 Docomar750 closed 5 months ago
1
Updated api.bambulab.com/cn certificates

#138 btastic closed 5 months ago
2
FATAL BBL JWT PARSING ERROR since today

#137 Sascha27 closed 5 months ago
7
Fatal BWL JWT Parsing Error

#136 Mavrap closed 5 months ago
8
WIF connected but can not Getting accessToken from Bambu Cloud

#135 all4fun closed 5 months ago
1
Local network connection issue

#134 JackyHuang087 closed 5 months ago
1
Please bring back LAN support!

#133 cwkean87 closed 5 months ago
2
JWT parsing error

#132 Loadie150 closed 5 months ago
16
Ability to Interface with Printer Broken w/ Bambu Labs update 1.6.??

#131 VPrintsUS closed 5 months ago
7