-
Hi,
I ordered ESP32-3248S035C but received the ESP32-3248S035 without suffix.
I is impossible to get information from the supplier on wether this one has a touch screen, and if it is R or C.
Anyon…
-
Got everything to compile and upload, but just a blank screen. Tried changing:
#define LV_USE_ST7796 1
in lv_config.h, but seems ineffective. I set the default board with:
default_envs = esp32-324…
-
The page https://openhasp.haswitchplate.com/0.7.0/hardware/sunton/esp32-3248s035/ says
> The ESP32-3248S035 boards all come with an integrated ESP32-S3 chip, 16 MB flash and 8 MB PSRAM
But furt…
-
Updated PlatformIO and Python then Building this repo on my machine with platformIO on VSCode gives me this error: Might be something with path of esp32-3248s035 but it would be awesome if it was comp…
-
Hi,
I'm using ESP32_3248S035
I don't know how this happened ? All my previous compilations on another PC were OK, didn't get this error at all with the same library version and the same ESP32 bo…
eagl1 updated
14 hours ago
-
1. I get a Guru Meditation Error: Core 1 panic'ed, after loading an LVGL file that is running well on ESP32-3248S035, using ESP32wroom , but due to insufficient memory to include BLE, I needed to go …
-
I flashed the firmware out of the lnbits plugin, it says "BitcoinTaps PartyTap (version 827652 ) "
Looking up the PINS in https://forum.arduino.cc/t/esp32-sunton-esp32-3248s035-i2c/1188634 I connect…
-
Does the esp32-3248S035C, with it's higher resolution, have sufficient memory to run the demo? Mine hangs at `lv_display_set_buffers`
I'm not sure if this is a esp32-smartdisplay-demo, an lvgl thin…
-
I am using the hardware serial on ESP32 but it seems doesn't work, the PZEM cannot give a response to ESP32. The serial monitor shows only.
`Custom Address:0
Error reading voltage
`
I was thin…
-
Hi, this seems to be a very small starting point for developing a sunton ESP32-3248S035c device for platformio (I hope) - I love it. Only missing, how to get it integrated in platformio? Is there a pl…