-
Thank you for your efforts and clear instruction and references. I am currently trying to implement the Arduino Thin Client on 800X480 smart display (ESP32-8048S050).
Would you kindly add support …
-
My panel has an integrated ESP32-S3 (ESP32-8048S050, ST7262 driver chip) and as far as I can make out from the documentation, addresses the panel in 24-bit mode. At least 24 GPIO's are mentioned in th…
-
I am looking to add support for 8bit parallel lcd's to esphome and figured it would be helpful to get lgfx included in esphome somehow mainly for the driver support...
While researching what people…
xNUTx updated
6 months ago
-
I have this display - https://www.aliexpress.com/item/1005006335587633.html - and tried setting up the demo project but I get the following repeating:
```
[ 5149][I][main.cpp:37] setup(): Board: …
-
SPI
Two separate SPI busses are being used for the display and the touchscreen.
spi:
- id: lcd
clk_pin: GPIO14
mosi_pin: GPIO13
miso_pin: GPIO12
- id: touch
clk_pin: GPIO…
1achy updated
5 months ago
-
As far as I understand, you already build lvgl_micropython automatically for several computer architectures.
Sadly, I can't build it and don't understand why. I suppose that I have some environment, …
-
This isn't a bug, I just wanted to share some info. I was able to get this working using the latest TFT_eSPI library - using the older custom_component method vs. the newer external_components method…
-
### The problem
I have a weather forecat text_sensor and I'm attempting to translate the forecast string to an icon using the material design icons webfont:
```
font:
- file: "fonts/materialde…
-
## Environment ( 実行環境 )
- MCU or Board name: [ESP32-8048S050 - Sunton ESP32-S3 5" 800*480 IPS with Capacitive Touch]
- Panel Driver IC: [ST7262]
- Bus type: [I2C]
- LovyanGFX versi…
-
I have a ESP32-8048S070 which shows a strange origin dislocation. With draw and and print (TextSize(1)) the origin appears somewhere in the middle of the screen. Funny is that the origin for the print…