-
hey, is this repo still working? also can i connect an esp-32cam??
-
Hello
I bought two ESP32-CAM cameras, and I set them up according to the instructions for connecting to PrusaConnect and the cameras are running. When I connect to their wi-fi it works, when I add it…
-
i have esp32 cameras setup on 2 different machines. i can see camera image on fluidd interface on my local desktop but when im away and using the mobileraker app it says "sorry... the webcam type "Web…
-
First let me start by letting everyone know I am novice with the ESP32-CAM. Purchased 2 from Amazon. Espressif used to install firmware. Been experiencing lock ups. Several times had to reflash …
-
/**
* This example takes a picture every 5s and print its size on serial monitor.
*/
// =============================== SETUP ======================================
// 1. Board setup (Uncomm…
-
Great project! Look really fun!
I think possibly adding FPV would make it perfect ( not sure if controller range is a limit)
Here is example project that is showing it is possible.
https://gi…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration i…
-
Hello, i'm trying to use the freenove esp32 wrover board, with Zephyr Os.
Everything was perfect until i try to use the camera, i add it to the devicetree with :
```
&pinctrl {
i2c_cam: i2c_…
-
/Users/andy/Downloads/GoProRC_ESP32-main/GoProRC_ESP32-main/GoProRC_ESP32/GoProRC_ESP32.ino: In function 'void setup()':
/Users/andy/Downloads/GoProRC_ESP32-main/GoProRC_ESP32-main/GoProRC_ESP32/GoPr…
-
Hi, nice work!
I found in issue #47 that I cloud enable the LED Flash with the
/flash URL. But the requests failed and I can't find it in the source code?
Also there is no hint to the URL / LED f…