-
Excuse me,Will you continue to improve the exynos7420?
-
when open the Program use the Samsung ,this shut down.is the cpu not match ??
-
Trying to build crDroid 8 (which is based on Lineage 19.1) with this, it doesn't build. All of the errors seem to be coming from gralloc.
Full terminal output of a build attempt - https://pastebin.…
-
本人移植到了tiny4412上,FaceIdentificaton没经过Neon优化,识别时间为17.8秒,经过Neon优化后,识别速度为1.35秒;另外FaceDetection和FaceAlignment没经过优化,时间为120ms,220ms;
-
### Device:
Galaxy S6 edge
### OS version (KitKat/Lollipop/Marshmallow/Nougat):
LineageOS 14.1 nougat
### Built from repo (date and build command) or downloaded from website (links):
Github sourc…
-
Tree: Halium 7.1
- [x] Create manifest
(Will upload when confirmed that it works)
- [x] Boot image and system image build successfully
(Will upload when confirmed that it works)
- [ ] Device bo…
-
Tree: halium-7.1
Used UT rootfs: ubuntu-touch-hybris-xenial-arm64-rootfs
- [x] Create [manifest](https://github.com/Halium/halium-devices/pull/309)
- [x] Boot image and system image build success…
-
When doing simple `import numpy as np` the cpu goes to 100% usage in 7 out of 8 cores available.
**Environment**
Fresh install Ubuntu 22.04 arm64 python3.11
**Python and NumPy Versions:**
```s…
-
**Describe the issue:** HWC overlays do not work, instead showing "FB" instead of "HWC" or "Overlay" in dumpsys SurfaceFlinger
Using Opensource exynos/exynos5 SLSI bsp sources from LineageOS.
-
After using the device normally for a while, the UI will begin to chug and lag noticeably, almost to the point where its unusable.
Disabling the hardware overlays fixes the problem, however this is…