-
On Ethos 1.4.15 (X20 PRO) using TW, there is no way to check if LoRA or FSK is working. There is only a "global" RSSI and VFR.
On rx side, there are 2 leds (one per protocol) which are supposed to …
-
Would it be possible to put Offset in the Mix, please.
It is used to do idle up or high idle on gas engines and also used for Crow setup for airplanes. It can also be used for flaperons and many o…
-
Instead of CRSF output, generate PWM signals to drive servos.
It would be great to have ExpressLRS drive servos directly for fixed wings that wouldn't have a flight controller. The developers have …
-
Right.
Been thinking about how the lua model wizards work. Problem with the current system is:
It is a 'first time setup only. Creates the mixes - then leaves you to edit the proper mixes.
I thin…
-
Taranis.
Since OpenTx 2.0, the offset in a mixer line is applied after weight and curve instead of being the first operation. And so it is for inputs.
Example with differential and offset on an input:…
-
```
The facts :
Open9x use the stick orders as input only with exponential and dual-rate
formatting.
The problem :
For some advanced gliders settings (typicaly snap-flap in F3F / F3B), it is
necess…
-
```
The facts :
Open9x use the stick orders as input only with exponential and dual-rate
formatting.
The problem :
For some advanced gliders settings (typicaly snap-flap in F3F / F3B), it is
necess…
-
```
The facts :
Open9x use the stick orders as input only with exponential and dual-rate
formatting.
The problem :
For some advanced gliders settings (typicaly snap-flap in F3F / F3B), it is
necess…
-
```
The facts :
Open9x use the stick orders as input only with exponential and dual-rate
formatting.
The problem :
For some advanced gliders settings (typicaly snap-flap in F3F / F3B), it is
necess…
-
```
The facts :
Open9x use the stick orders as input only with exponential and dual-rate
formatting.
The problem :
For some advanced gliders settings (typicaly snap-flap in F3F / F3B), it is
necess…