-
Lamps of all kind will not block update when provided with a lamp or cable. As a result, it's possible to fill a line of lamps with cables and have none of them connect. This forces you to manually bl…
-
I was surprised to find out that the mnist example took in images (referred to as `x` in the `QFCModel` code) with a [256, 16] format, where 256 is the batch size and 16 is the shrunken then flattened…
-
### WIRE Version
v0.15.0
### What were you trying to do?
I'm creating, parsing and validating WIRE files that contains multiple transactions.
### What did you expect to see?
A parsed JS…
-
In competitions pilots need to be able to set a "Pilot Event Marker" and record it using their IGC-logger. If the logger is a Power-FLARM, a NMEA-Sequence "$PFLAI,PILOTEVENT*..." shall to be sent to i…
-
Adding external random phase noise might help the solver converge on a more optimal solution by preventing it from getting stuck in local energy minima. It also may enable new features involving measu…
-
It would be nice to have a complete example of testing a protocol. UART [send](https://github.com/raspberrypi/pico-examples/blob/master/pio/uart_tx/uart_tx.pio) and [receive](https://github.com/raspbe…
-
The dataprep modules read raw data or digits and write recob::Wire. It would be useful if that structure could be fed back into dataprep, in particular, so dataprep could be used to further process th…
-
I rewired the power from the starting room generator (using flux ducts) to run through a series of 4 energy modules (and added a few more generators)
from the output side of the energy modules I re…
-
This is a comment rather than a fault. I want to use GP18 and 19 as inputs in a logic analyser application. I love the Maker Pi Pico with its LEDs driven by FETS so they do not create a siginificant l…
-
I ran into a snag with the output of gowin_unpack.py when trying to synthesize it in the Gowin IDE.
The IDE fails with an error on ALU definitions like this one:
ALU R2C6_ALU_0
(
.SUM(R2C6_F0)…