-
HI,
recent I firmed up this firmware & try to debug some codes did not work,
I found few codes are different
such as
ALARM_REPORT => \xFB\x11\x01\x1D
CMD_STOP_RING => \xFB\x23\x01\x2F
…
-
Hey, just poking around various GitHub repos since I'm having a Fermax Veo WiFi system installed tomorrow! I currently use Scrypted (as a Home Assistant add-on) to feed some rtsp/rtmp video feeds int…
-
Hi,
The script works great, but there's a lot of space for making it better.
Right now it can't be used as a library in other software, for example as a library used by HA integration. This is b…
yawor updated
2 months ago
-
According to manual I found on internet. Tripping wires 1 & 3 may just do the trick.
-
Thanks a lot for this script!! I have it already working in HA (9449 model too) but it opens 1 of the 2 doors I have, so I suppose I would need device id and also access ID per each door. Please how c…
-
I'm thinking about buying a Fermax Wi-Box to be able to control my video door opener with Apple Home.
As I see you handled to connect this to Apple HomeKit through Homebridge, I wonder if such a thi…
-
First of all, congratulations for the great work in this project. Given the insight you were able to acquire over the Wi-Box device, do you have any clue on what kind of communication it establishes w…
-
I'm thinking if it could run on its own or arduino, using a doorbell cable to provide power, because I observed 5V above it.
-
Hello, I’m replacing fermax doorbell intercom with a custom made. I’m trying to achieve two-way audio intercom. I checked out commits of ffmpeg-camera and found that’s already been released before: 92…
-
hello when I run this script in I get the error:
```
Traceback (most recent call last):
File "/config/sheel_scripts/fermax_opendoor/open_door.py", line 176, in
access_token = auth(cache, …