-
Hi
i can't find any firmware to support the G4 its starting on 1.3-RC47i
it will be very appreciated to get the support for the G4
-
I would really like to see the new S2M protocol by FETTEC, which is a good bit faster and more efficient (comparable to dshot1200) and seems to handle telemetry in a very clean way. The protocol _coul…
-
Hello,
I've connected UART from Caddx Vista to RX1 and TX1 on my FC via connector. I've tried to connect Vista to UART3 also, but no effect. When I use advanced serial configuration in GUI and set …
-
Hi I have 3 new builds with FETtec full stact FC and 45amp 4in1 ESC. Newest Kiss gui and ESC configurator. I tried to flash multiple firmwares on FC 46i,46y,46o but the passthrough is not working and …
-
I have tried to connect a new Fettec FC to MacOS - but without success. A KissCC and a KissFC V1 are able to connect.
I have a Win7 Installation on this Macbook and tried to connect with success -…
-
Howdy! I've just purchased a KCC and am unable to get it to connect to my Fettec AIO. Upon loading of the FC, the KKC says I need to update and displays a QR code. I've updated the KKC to latest FW 1.…
-
Fettec esc 45A
Fettec FC
fettec configurator 0.1.28
fettec_KISSFC-1.3-RC45Y
the motors working great
as soon as i start the KISS FC Passthrough
all the esc light are flashing
and the passthr…
-
First I've installed the newest FW to the KKC because an older one told me that it would be nessesary to work with FETtec FC.
With the FC everything is fine.
But when connecting the lipo to the qu…
-
when I download fettec configurator for 64bit ( or 32 bit) I get the ESC configurator. I need the regular configurator for updating my OSD. what am I doing wrong?
-
Hi,
I just switch to KISS using the fettec G4 and fettec 45a 4in1.
But having some issues with ESC connection. I used the dedicated wires to connect with FC but can't seem to detect with Fettec …