-
Today, my QIDI Q1 Pro is consistently reporting the filament sensor as "Off" even though there is filament present. I used the commands ENABLE_FILAMENT_WIDTH_LOG and QUERY_RAW_FILAMENT_WIDTH to check …
-
### Klippain branch
- [X] I confirm using the main branch
### Version
latest
### Describe the bug and expected behavior
Fix filament sensor variable from material parameters to default to 1 if no…
-
Where to connect Ender 3 filament runout sensor?
-
### Description
When printing after a 30 minutes I get filament runout error and pausing print. Even there is no filament runout.
### Steps to reproduce
I push Icon resume and than printing…
Blisk updated
1 month ago
-
I have a question on whether or not I can connect a filament sensor to extra pins on my board.
I am using the tap mod so those pins and the x-limit switch is taken. I saw another post with a 2209 …
-
I calibrated at room temperature my filament sensor using drill bits 1.5, 1.6, 1.7, 1.8, 1.9, 2.0 mm (verified with a micrometer) and I found that the sensor behaviour is not linear, and the values pr…
-
I have a suggestion for the endless spool function in happy hare on the ercf.
Rather than unload the filament once a runout has been detected, I recommend that it instead passes a specified amount of…
-
My system uses the extruder gear separation due to loaded filament for the extruder_sensor. This leads to problems when trying to run MMU_CALIBRATE_BOWDEN as the sensor fails to trigger. Being able to…
-
MK3
I often forget to unload filament before beginning nozzle change heatup, which leads to clogs due to the 280c heatup.
Would be very very simple for FW to simply check filament sensor and/or …
-
Hi, I hade few issues in just 2 days (frustrating) when I had to disassemble hotend, after I ran out of filament on the spool. Now it works like this:
1. Filament runs out - good
2. First sensor is …