-
**Hardware Setup**
I have a Prusa iMK3S, with a Raspberry Pi 4B, which works fine. I can upload the Gcode from Prusa Slicer by Wifi to the Octoprint Server and the printer works fine.
**Describe t…
-
Enable modular functionality to automatically update raspi eeprom firmware.
This should go into /boot along with a config IIRC
-
Hi, great work from you for the PS4 community.
Is there a plan to update the NoDB Updater so we can update to firmware 11.00?
I'm currently stuck on 9.03...
-
Hi, I have the following code that I used to successfully upload to ESP32 but on the dashboard I cannot see the progress and the status is not updating to successful when completed, but on the termina…
-
With the 1.10 linux firmware updater ("reflex-linux-x86_64" in https://github.com/misteraddons/Reflex-Adapt/releases/download/v1.10/reflex-v1.10.zip) - while waiting at the "Press the RESET button on …
-
[xs_ios18_beta3.log](https://github.com/user-attachments/files/16229849/xs_ios18_beta3.log)
-
Any chance of getting this to update the stick's firmware also? Mine is still stuck on 2.0 and so I can't actually use it with your tool until I find a windows machine to run the official updater on.
-
Add the `zuneupdate.com/resources` mod that allows the updating of device firmware.
Needs to point `resources.zune.net` (and potentially `resources.zunes.tk`) to https://www.zuneupdate.com/ (`66.115.…
-
**ProblemType**
Bug
**Date**
Wed Apr 17 16:24:53 2024
**CurrentDesktop**
KDE
**ProcEnviron**
LANG=en_US.UTF-8
LANGUAGE=
LC_ADDRESS=fr_FR.UTF-8
LC_IDENTIFICATION=fr_FR.UTF-8
LC_MEASUREMENT=fr_FR.UTF…
-
Alot of users have issues updating the device. Its not too hard, but for a non technical user its probably not ideal.
We could have a GUI that prompts the user what to do and update the firmware.