-
The current implementation of IR and RF Reading/Sniffing/Replay requires a successful decode the signals.
This works fine in many cases, but in some cases it may fail to decode (e.g. [Air Conditioner…
-
Hi all,
I've received my Chamaleon Lite and Devkit from the Indiegogo campaign. I have troubles with emulating the LF on Lite and DevKit. However, with the same FW and same card on same slot Ultra i…
-
**Feature request.**
Custom GIF viewer for bruce firmware using jpg frame i think can be done esealy using the jpg view
and i also found this repo for GIF viewer with M5stack https://github.com/tob…
-
**Describe the bug**
I'm using the latest Roguemaster firmware (RM1024-0158-0.93.1-1129e6e) and flashed the ESP32-WROOM (Chip is ESP32-D0WD-V3 (revision v3.1)) with FZEasyMarauderFlash with release i…
-
### Describe the bug.
The flipper0 flashed the latest firmware. The Flipper app spends a lot of time on syncing everytime when flipper0 connected to mobile. When the synchronization is complete, it …
-
### Describe the enhancement you're suggesting.
Allow users to generate nfc codes based on what information they want to share. For example, allow users to share files stored on the flipper making …
-
### Describe the bug.
upon launching the USB Midi while attached to a windows 10 laptop the application became stuck loading. tried a forced reset and this caused the device to crash.
was able t…
-
Hi,
While updating with a friend to this custom FW (yes, we already updated to latest stock version first and followed the procedure in the README) our freshly arrived Flipper0, it seemed to be stuck…
-
Which IDE is recommended/preferred for flipper firmware development?
Thanks
-
## 🐛 Bug Report
Network Plugin can't parse UTF8 characters and can't decode images properly.
## To Reproduce
### 1.Test Link:
https://ex.ke.com/sdk/recommend/html/100001314?hdicCityId=110000&pa…