-
Hi there,
Is there a particular reason for the FMCOMMS5 soure block not having the "auto filter" option to allow for lower sample rates than 2.048MSPS, like the FMCOMMS2/3/4 source block has?
In the…
-
Dear Slaaja,
thanks for this great GPS-Blocks for GNU-Radio!!
But I´ve one big problem. Your blocks are working fine in testbench, even with much simulated noise. But in real operation i wasn´t …
-
When using gnuradio, the sample rate cannot be set above 5MSPS, otherwise the waveform is not right.
![Screenshot from 2021-11-21 10-22-32](https://user-images.githubusercontent.com/8504573/1427468…
-
Hello,
I'm trying to use GNU Radio and USRP E310 in "network mode" and I found out that this is possible using iio drivers and gr-iio.
To simplify the interface I added source/sink blocks in gr-ii…
-
I wonder if there are any instructions documenting how to build the SD Image from the zip file located in the [releases](https://github.com/MicroPhase/antsdr-fw/releases) folder?
Also I would like to…
-
The FMCOMMS User guide claims "All the Analog Devices Vivado HDL reference designs have inside a ‘donut hole’ to accommodate custom IPs."
My team wants to know if we would be okay just using Vitis …
-
Hi,
I followed the last developments of the openwifi project with high interest and tried to start the new release Notter 1.4.0 by using the "zed_fmcs2-board"
and the "zcu102_fmcs2-board". Howeve…
-
I'm usung Ubuntu 20.4 and compiled GNURadio v3.11.0.0git-3-g3349d483 from source.
When I try to use FMComms 2/3/4 I got the following message:
(NameError("'len_tag_key' is not defined")
So I a…
-
Hi guys will a yocto layer for zu11EG + fmcomms 8 be Realeased ? Or can I use the existing zu11EG adrv2crr_fmc device tree and add the two extra adrv9009 devices that come with the fmcomms8?
tha…
-
### What happened?
With FMComms 2/3/4 Sources or Sinks, the grc file would return an error during generation.
I compared FMComms to Pluto SDR, it seems the FMComms components lack len_tag_key conf…