-
@enjoy-digital @mithro do you think it is feasible to modify this tutorial to use the ice40 Fomu instead of Nexys4DDR?
-
I'm interested in getting some nMigen examples for the Fomu workshop site. @mithro suggested I asked you. Have you tried out these examples with the Fomu? Thanks!
-
Dear smoge,
I have evaluated the following two codes, slightly modified from your sample code in the help document:
```
(
a = 12.collect({|i|
( 'midinote': (
(63 + rrand(-6,6.5) + [0,8…
prko updated
10 months ago
-
I have uploaded the code using dfu -D build.dfu. Success and reported that ttyACM0 is available. dmesg also reports ttyACM0 is available. Attempts to communicate with minicom fail. device /dev/ttyACM0…
-
It would be awesome if the SaxonSoC supported the [Tomu FPGA (Fomu)](https://fomu.im). This would be an awesome introduction into to pure SpinalHDL design.
Happy to send people boards.
-
I get the following error from litex. It seems slightly werid because that is because a `name` is not passed to CSRStorage.
```
lxbuildenv: v2020.6.1.1 (run ./bitstream.py --lx-help for help)
fat…
-
```sh
fomu@fomu-jig:~ $ fomu-flash -i -t 4
Manufacturer ID: unknown (c2)
Memory model: unknown (28)
Memory size: unknown (15)
Device ID: 15
Serial number: ff ff ff ff
Status 1: 00
Status 2: ff…
-
Add a UART to the FOMU (needs a USB core + UART over USB)
-
I'm unable to call `f.ly`, `f.midi` or `f.xml`. I see the problem is that the `fomus` executable is not present in my system's path. I am specifying the correct LilyPond and PDF viewer paths.
I am …
-
I'm not sure if this is a `nextpnr` specific issue (eg, bitstream generation), or a hardware limitation. But since there *are* parameters which seem to be intended to map between ICE40 RGB driver cha…