-
Hello there,
The problem that I am having is compiling the FreeIMU_serial_2 which is suppose to be an edited version of the first version so that it can be compatibile with the new arduino IDEs. Ho…
-
Arduino IDE - 1.5.7
Arduino Due
Windows 10 64 bit
GY-86
I am trying to upload the FreeIMU_serial for calibration but I am flooded with errors when I do. The only changes I've made to the sketch …
-
After initing the IMU I can keep reading valid yaw, pitch, roll values as long as I do it quickly. If I stop reading values for like 10 seconds the getYawPitchRoll() function starts returning NaN's. I…
-
Hi Kris
Been hacking on your controls library so I can use one of the new RA8876 parallel display libraries that we've been working on for the Teensy 4.1.
Since most of libraries are derivatives o…
-
Hi.
I think not all files there isn't it?
Some header files.
-
I implemented your code with my ICM20948 IMU
It was working but the values are updating tooo slowly.
Why? Do i need to change something?
I can send my project!!
Please help me.
Is Gyro and Ac…
-
```
What steps will reproduce the problem?
1. Compiled/uploaded the SF9DOF_AHRS_1_1.zip contents
2. Change Com port value in python script
3. Powered on the 9dof and ran the python script
What is the…
-
```
What steps will reproduce the problem?
1. Compiled/uploaded the SF9DOF_AHRS_1_1.zip contents
2. Change Com port value in python script
3. Powered on the 9dof and ran the python script
What is the…
-
```
What steps will reproduce the problem?
1. Compiled/uploaded the SF9DOF_AHRS_1_1.zip contents
2. Change Com port value in python script
3. Powered on the 9dof and ran the python script
What is the…
-
```
What steps will reproduce the problem?
1. Compiled/uploaded the SF9DOF_AHRS_1_1.zip contents
2. Change Com port value in python script
3. Powered on the 9dof and ran the python script
What is the…