-
I had to modify lib ft857.h (line 107) prototype to:
void begin(long baudrate, SerialConfig mode); // custom baudrate and mode
and in ft857.cpp (line 55)
// Alternative initializer with a custom ba…
-
I'm using a OSX 11.6, hamlib 4.4, and gpredict 2.2.1. I installed gpredict via macports then again via homebrew. I also tried hamlib 4.0. All the varieties have the same problem.
When controllin…
-
I’m using my FT-817 mostly for portable operation and I run Gpredict on a headless Raspberry Zero controlled via VNC on a tablet.
Right now I’m using the option FT817/FT857/FT897 (auto) but switchi…
-
Some users needs to use the real serial port in arduino to debug purposes, and there is a chance to port this to sotware serial.
-
The mode switch is not active in Rig Widget.
![RigWidget](https://github.com/foldynl/QLog/assets/3379287/3da3f34b-9a70-41f5-9fdc-cbbb06326670)
![RigSettings](https://github.com/foldynl/QLog/assets/…
-
Can not set frequency/mode from CQRLOG for my rig (readout works nicely).
Also tested with flrig and wsjtx with the same settings and it works (also tested under windows with flrig, and it works ther…
-
As the FreeBSD port is way back at 3.3, I thought I'd try building a more current version:
```
% uname -a
FreeBSD pinawa 13.0-RELEASE-p3 FreeBSD 13.0-RELEASE-p3 #0: Tue Jun 29 19:46:20 UTC 2021 …
-
-
When starting uhhr it starts fine and then the console is spammed constantly with overrun.
On the ui side none of the radio control buttons seem to do anything to the radio and any entered frequenc…
-
Your firmware version: D2.11.87
Your bootloader version: 5.0.4
### Describe the issue:
With WSJT-X 2.2.1, I've set the appropriate rig control settings and keep getting the error "Hamlib error…