-
### R4-PA-C08
* MOC-R4PAC08U37-S3D - Firmware update fail
* MOC-R4PAC08U31-S3B - Firmware update fail
### R4-PA-C10
* MOC-R4PAC10U37-S3B - iDrac unresponsive
* MOC-R4PAC10U35-S3A - iDrac unresponsive…
-
Proszę o aktywację konta oponyfx2 pkulakowski@fx2.pl
-
[Marketplace](https://marketplace.xbox.com/en-US/Product/Pinball-FX2/66acd000-77fe-1000-9115-d80258410a23)
Pinball FX 2
Tested on xenia-project/xenia@f7ea931
# Issues:
To be honest? I'm not en…
-
```
def fx1():
...
def fx2():
...
mc = MiddlewareChain(fx1, fx2)
app.before_request("/route", mc)
-
The Cypress FX2 to used for JTAG programming of the FPGA, so it needs to come up no matter what the FPGA is currently programmed with. Currently if the FPGA doesn't pull Cypress-RST net high or float …
-
Currently we use the fxload tool which is written in C. The code for the tool can be found at https://github.com/libusb/libusb/blob/master/examples/fxload.c and https://github.com/libusb/libusb/blob/m…
-
### Page URL
https://docs.netapp.com/us-en/ontap-systems-switches/switch-cisco-9336c-fx2-storage/install-nxos-rcf-9336c-storage.html
### Page title
Install the Reference Configuration File (RCF)
#…
-
- [ ] Connect uplink to ESI core (both mgmt and data)
- [ ] Update firmware on 3 Dell os9 TORS
- [ ] Initial switch configuration on os9 TORS
-
There are a couple of simulation options for 8051 CPU. Most are unlikely to support the FX2's USB peripheral.
* http://www.edsim51.com/
* https://sourceforge.net/projects/mcu8051ide/
-
The d2 calculation near the end of deln_flux has discrepant results between 64- and 32-bit caulculations:
https://github.com/NOAA-GFDL/GFDL_atmos_cubed_sphere/blob/9ca1468b9f247a8d747e877be270c9e7b…