-
Would it be possible to add the homing per axis for TinyG (g2core) firmware. Just check it and homing per axis on g2core works the same way as it does in Marlin and Repetier.
-
### Issue description
I've been searching for a better firmware solution for the SMA3X8C also known as the Printrboard g2Core. There are many of these boards out there in the wild as well available f…
-
Hello,
if it possible to build motate for an LPC1769?
It's the cpu of the smoothieboard and it would be great to use this as CNC Controller.
I found this here for GRBL:
https://github.com/gne…
-
Hi Friends,
I am new to this CNC/grbl world and I am learning from different communities (grbl, synthetos, smoothie, marlymc, etc..)
I have been using g2core, but the project seems to be a litt…
-
Hi,
after every manual command over the serial console in CP, the spjs send this command:
![image](https://cloud.githubusercontent.com/assets/3763176/21011075/d33d37a4-bd4f-11e6-89a2-3c2470267609.…
-
Not sure if this is the same dependency bug listed in another issue, but npm fails to install node-g2core-api on my Mac. Errors seem to revolve around serialport. Any ideas whether this is an issue wi…
-
Hi. Please tell me how you fixed g2core to compile. I have a problem with laser_tool error! Thanks in advance!
-
#### Description
Is it possible to use a macro or some startup script to set the settings in Tinyg?
Here are all the settings I need for my machine
{1tr:1.75}
{2tr:1.75}
{4tr:1.75}
{2po:1}
{…
-
This is a bit of a meta-issue, as I have not found a discussion forum (as yet) for g2core.
My interest is in using g2core for 3D printing. From the commit history, my impression is that support for…
-
g2core crashes completely (no more communication, no blinking RX-LED on Arduino Due) when the program contains M0 and a feedhold is issued.
Example:
- G-code:
```
$xam=1
G0X0
G0X10…