-
> Как я понял из README, вы смогли разобраться со структурой GWG файлов. Если можно, поделитесь пожалуйста, как можно получить стопку DICOM файлов из Galileos DATA?
Я могу помочь конвертиро…
-
This is an audio system processor from Meyersound.
I would like to be able to control mutes, groups of mutes, and recalling snapshots.
here is a link to the control pdf
https://meyersound.com…
-
Hi, I want to apply photometric corrections using the photomet function on Galileo NIMS cubes. To do that, I need to run spiceinit first, but I keep encountering this error (see image). I have downloa…
-
## Current Behavior
Not able to set GPS satelites to Galileo or Glonas
Not able to arm the vehicle, even if I have more than 10 satelites locked
https://github.com/user-attachments/assets/fa14cd0…
-
Hi.
Will this module receive Galileo satellites.
On the website it says that it will but some config. needs to be done to enable it.
What config. and what software to use for it?
Will that config.…
-
I have a slightly scratchy squeaking noise when the Z axis is shutting down, what could that be?
I took note of the shims in the planetary gear, which are missing from the instructions
-
In here https://github.com/NNPDF/pineappl/pull/297 due to a problem with github workflows, the glibc support was moved all the way up to 2.29.
This is a problem in some clusters that are using very…
-
Hello,
I want to make a phone number ring with a T-SIM7670G.
I tested these examples for the first time.
LilyGo-T-PCIE/examples/A7670/TinyGSM_Net_GNSS/TinyGSM_Net_GNSS.ino
I have to choose a GNS…
-
As far as I can tell, inotool does not support the new Intel Galileo Arduino. Can anyone comment if that will be added in the future?
Thanks.
-
I've been working with the Quectel RM500Q-GL module, which has a GNSS engine and can output NMEA sentences.
I found your project and it almost fit my needs, except that I'm not using GLONASS but a co…