-
Per microsoft/uf2#46 there is now a JSON file that can be used to generate the values in `hf2/src/bininfo.rs`
I can take a stab at making a script to auto-update this for you.
For your case, the…
-
After flashing the test code, BLHeli Suite is not always be able to connect to the ESCs. It fails to read the configurations after connecting and I'm only able to read the configurations one by one. T…
-
- https://lcsc.com/search?q=gd32f3 (sort by price)
- http://www.gigadevice.com/products/microcontrollers/gd32/ (see selection guide pdf)
While exact clones of stm32 are not anything special (~ sim…
-
### Description
There some Artillery Genius PRO or X2 that are not able to flash the LCD firmware.
### Steps to reproduce
Try to flash as usual
**Actual behavior**
MKSTFT28.bin is not d…
-
https://github.com/CommunityGD32Cores/ArduinoCore-GD32/blob/c2bfff7740ec2dc58478a5eddaa537c49b7df885/variants/GD32F350CB_GENERIC/PeripheralPins.c#L114
Should be commented this out::
GPIO_AF_9, …
-
Please add support on this m4 gd32 chip - GD32F350. Thanks.
-
This issue tracks the porting of boards and SoCs to https://github.com/zephyrproject-rtos/zephyr/issues/51833.
### SoC series: AGILEX
- [x] soc: AGILEX
- [x] board: intel_socfpga_agilex_socdk, …
-
can not build with the following command in ubuntu :
cd Vllink_Lite/vsf/project_vllink_lite/vllink_lite/cmake_vllinklite_gd32f350
cmake -GNinja -S. -Bbuild
ERROR LOG:
-- No build type selecte…
-
I tried to use the probe with latest pyocd,
For "pyocd list" command, the probe can be recognized,
```
$ pyocd list
# Probe/Board Unique ID Target
-------------…
-
I've installed the latest 32.62 test version to try out signal line RPM telemetry. That part is working fine although telemetry coming from the telemetry line is all messed up. Connecting the battery …