-
From another GM kit (offline only, without WiFi, without LoRa) I have a LND712 (alpha, beta, gamma) which could be put online using multigeiger maybe?
Tube specs: https://www.lndinc.com/products/ge…
-
Please add an example for J305 tube.
In example, I found for other board with j305 tube there is "offset: -12.0" filter because J305 has background noise 0.2 pulses / sec x 60 sec = 12 CPM (Counts pe…
-
Looking to collect a massive list of all the different science instruments that one might want to use!
-
If we could implement a drop down menu for the tube selection the fixed sensors would be much easier to do the cpm-uSv/h conversion. Tube chooises could be done by the admins.
rob
-
I don't have much in the way of details but Windows 10 x64, the gammascout toolbox 5.36 works fine but opengammatool gets stuck at "Connecting...". No errors or any other information to point as to wh…
-
I was discussing a spacesuit with @SwissalpS and had an idea about it.
In real life, astronauts use [this thing](https://en.wikipedia.org/wiki/Primary_life_support_system) to well, stay alive: this d…
-
## Blogs
- https://github.com/Staok/thoughs-about-hardware-design
- https://www.emoe.xyz/all-about-electronics/
- https://www.analog.com/cn/resources/reference-designs.html
- https://www.envox.eu/…
-
Looks like good footprints for fuse holders were deleted. They were described as "Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_open_universal_Type-III", type II and I (also other footprints with 5x20 a…
-
I got strange results scanning the PWM settings, and then checked PWM with an oscilloscope, measuring on the tube facing side of R9. I see a clean square signal (when there is one). These are the resu…
ullix updated
2 months ago
-
Hey Ho,
My main Issue is, I have two different GC-01 (with the J321 and with J613) the readings of the two Device differ a lot.
The Device with the tiny tube (J613)? and original 1.62 Firmware I ha…