-
- [ ] Issues
- [ ] interpretation of a time-average between surfacings as a depth-average
- [ ] different needs for navigational and data analysis
- [ ] flight model differences according to model…
-
This has been on my list for years. Have not done this since I was flying gentlenav on a powered glider. Key to being able to provide accurate best range and endurance speeds. Can also be used to e…
-
XCSoar version
--------------
7.0
What should XCSoar do differently, what functionality should be added?
----------------------------------------------------------------------
A g…
XCNav updated
2 years ago
-
@julienmctighe found this project:
- [`genericairplanemodel` (GitLab)](https://gitlab.com/m6029/genericairplanemodel)
which might be useful to (at least some sub-part) of our project.
-
## Current Behavior
I've been looking through the logs of a recent glider flight and trying to understand the excessive amount of high dynamic power states that occur.
## Details
From a simple …
-
XCSoar version
--------------
7.23 as well as 7.24
What should XCSoar do differently, what functionality should be added?
----------------------------------------------------------------------
…
-
![image](https://user-images.githubusercontent.com/25598604/60763306-89651e00-a03f-11e9-893c-ac6ea76d9e6b.png)
^ IDG A32X
Hi guys -- even at a high speed, this makes no sense. At low speeds too, the…
-
Stall detection is needed. Must work with, and without, pitot tube.
related to stall recovery issue https://github.com/diydrones/ardupilot/issues/2669
-
Today I recorded a short flight and exported it as a CSV file with "Position and attitude" data.
[Test flight position and attitude.csv](https://github.com/till213/SkyDolly/files/15190698/Test.flight…
-
Currently Stratux does not prefer any source or attempt any "intelligent" processing with regards to traffic updates.
A traffic target is uniquely identified by its ICAO address. For emphasis: **when…