-
Please upload images and descriptions, as technical as possible of failures and successes.
Feel free to look through this log to learn from other mistakes and successes.
Shrink-O-Matic (Or, Ma…
-
When running the Pigmnts add-on, interactions on app.glowforge.com are negatively affected. Mouseover events on certain interface elements (such as the zoom in/out buttons) cause the entire screen to …
-
Hello @glowforge-opensource I know you had a lib that I saved the url for that allowed using the glowforge offline, but when I came back to check it out again there was nothing here. Did you ever fi…
-
Neither svg file would load into inkscape or to glowforge. Really good idea though to convert them.
-
Currently has no real information, should be similar to using the Glowforge or ULS lasers. May be worth waiting until after it is working again.
-
I would assume it would but I've only used glowforge so don't know much about Lightburn yet.
-
Hey folks, apologies in advance if I'm totally messing up the usage of this, but I'm trying out the **gerber-to-svg** stuff to turn a gerber from EasyEDA into something that I can laser on my glowforg…
-
I have a slightly odd (but potentially very cool) use case, and I've run into a bit of an issue.
I'd like to laser-cut thin acrylic for fit check/mockup boards for some complicated mechanical desig…
-
Place to track and have items requested, that all can see.
-
Typically in laser cutting we want to cut out all the interior lines (holes in a part) before cutting around the perimeter of a part. When a part is cut free from the sheet material sometimes it's po…