-
There are various factors other than distance that can change the proximity sensor's readings. The largest two appear to be the amount of ambient light and how reflective the opposing surface is. That…
-
PSDセンサについて説明がありません。Position Sensitive Detectorのことでしょうか?本文中に説明が必要かと思います。
また、型番が2Y0A02となっていますが、これはGP2Y0A02のことでしょうか?
確かにこのデバイスは受光部はPSDセンサを使用しているようなのですが、赤外線距離センサや測距センサなどの用語が一般的な気がします。
-
```
何のためのTaskか?
1.(少なくとも)プロトタイプで使用する距離センサを選定
する
2.
何をすればクローズ可能か?
採用距離センサの決定
備考
```
Original issue reported on code.google.com by `joseph.s...@gmail.com` on 7 Jul 2012 at 3:37
-
- [x] is it dead? check if it turns on with power
- [x] connect to pi
- [x] check if we can get a response
- [x] fill in readDist() and read some distances
- [x] verify accuracy of sensor
- [x] …
-
Document (in this issue) the components required to construct a protobot mezzanine board which can be used to test various distance sensors as per issues #27 and #28
-
First - thank you for all you've done - - it's been quite straightforward to bring my Raspberry pi v3 B+ up and connect simultaneously to the multitude of sensors.
Here's my question:
- I've conn…
-
Detail the features required for a mezzanine card which can be mounted on protobot or used stand-alone with a raspberry PI to perform the distance sensor categorization detailed in issue #27.
Preli…
-
**Board:** Particle Photon
**Shield:** none
**Hardware:** Sharp GP2Y0A02YK0F distance sensor
**Johnny-Five Version:** 0.9.17
**Node version:** 0.12.9
**OS:** OSX 10.11.3
**Expected result:** same resu…
-
Hi,
I am using a proximity sensor and temperature sensor connected to a arduino uno. When only one is connected they work fine and even when both are connected and proximity sensor has nothing in bet…
-
Hello, I've been trying to get my `hc-sr04` sonar sensor to work with an Uno and johnny-five, but I'm having no luck.
I'm using the patched firmata to play nicely with `ping` (as detailed on [the Pin…