-
When trying to use Examples on an Adafruit ESP32 Feather V2 with tag `0.3.1` getting following error:
```
/Arduino/libraries/CAN/src/ESP32SJA1000.cpp:6:10: fatal error: esp_intr.h: No such file or …
-
Good morning,
I'm trying to compile the example "FeatureDemo.ino" project which I put: "#define GPIOPINOUT ESP32_FORUM_PINOUT".
I selected in the arduino IDE the "DOIT ESP3 DEVKIT V1" card which act…
-
`In file included from c:\Users\\Documents\Arduino\libraries\MCUFRIEND_kbv\MCUFRIEND_kbv.cpp:38:
c:\Users\\Documents\Arduino\libraries\MCUFRIEND_kbv\utility/mcufriend_shield.h: In function 'void writ…
-
I suspect there is some sort of a conflict with the OneWire library. When I comment out my `gpio_viewer.begin();` line (i.e. everything is loaded and set up, but I don't start the viewer) I get the no…
-
Is there any way to use this to drive multiple displays?
In theory you could drive 4 displays with an ESP32 directly (2x i2c, 2x addresses).
Thanks for your help :)
-
### IDE and version or firmware
Ardino IDE 2.3.2
### Operating System
Windows 10
### Description
Multiple GFX errors
In file included from c:\Users\micha\OneDrive\Documents\Arduino\libraries\A…
-
**_Dear All,
I want to compile SW for my new ESP32 T-Display-SW but already compiling der GFX Library will result in several errors**
`#include
#include
void setup()
{
Serial.…
-
I had a projet with this library and It was working well last year. Now I'm setuping a new raspberry pi with Raspberry OS Lite 64 bits and I got this error:
Error: pigpio error -123 in gpioSetISRFu…
-
### Description
We encountered an issue with the OneWire library on the ESP32-S3 when using pin 48. The library originally only supported pins up to 36. To enable the use of pin 48, we modified the O…
-
My work flow started from squareline studio using the makerfab simplified template for the MaTouch 7 standard. Exported the UI and copied into a new platformio project. All the library moved to platfo…