-
Currently, GPS data is passed by hard-coded values into a geo object. However, when the code will run on the future Antenna Control Unit, it will need to receive data from a GPS receiver unit. The way…
-
I have built one snsor whit a GPS M10 series, and I have connected it to a FRSKY receiver and Tx X20S. The data of Lat, Lon, Alt, Speed work correctly but the route always marks zero. Does anyone ha…
-
we will use emlid reach gps with pixhawk in rtk mode but we can't use qgroundcontrol for sending correction from base station to UAV .
-
# Budget DIY GPS/GNSS Base Station / Receiver and NTRIP Server Client with ESP32 and UM980
Effortlessly set up a budget DIY GPS/GNSS base station and NTRIP Server / NTRIP Client using ESP32 and the U…
-
Hi Ketil,
Based on my experience with Stratux receiver, I thought it might be useful to add GPS module support to your project.
For example VK172 USB or similar module for GPS/GLONASS. It cost ±5…
-
Please only ask questions related to source code.
- For questions about how to use or build QGC see: http://qgroundcontrol.com/#resources
- If your question still isn't answered, please check the fo…
-
Hi, and thank you for producing the Astroberry Server. It has been a great addition to my astrophotography rig. I love being able to sit inside the nice warm house and connect to it wirelessly on cold…
-
Hello @osqzss ,
I've recently been introduced to the wonderful world of GNSS and the gps-sdr-sim works perfectly for simulating GPS L1 signals.
I would really love to contribute to this repo and…
-
# Knowledge
1. See #4
2. Run [Python coordinate converter example](https://github.com/coloradocube/balloonsat/blob/main/gps/python/RaspberryPi/coordinate_converter/main.py).
3. Read & run [Python…
-
I compared the receivers found in `dwc:eventRemarks` with the receivers in the original detections.csv. The following receivers and associated locations should not be present in the data:
```
"rec…