-
Hi Johan,
Last year I built a project that connects to Growatt inverters on the RS485 port and reads status via modbus and pushes the data to MQTT. You can check my project here: https://github.com…
-
Hello,
I would like to use the data from growatt2mqtt for EVCC
EVCC propsed following for Growatt inverter:
([https://docs.evcc.io/docs/devices/meters](url))
`meters:
- name: my_grid
…
-
Hi,
I've found your great project and will use a part of your code on a arduino nano, to display the data on a oled display.
Yesterday I've received my MIC 1500TL-X, I have connected the RS485A1 and…
-
Hi,
first of all thank you for all your work.
i have the issue that in iobroker is only one datapoint were is all in, but not seperate points:
do you have any idea how it can send seperate?
-
Here’s some information on my communications configuration: My battery is managed by a Batrium of which is monitoring 8 separate batteries via the Batrium system. The Batrium is communication with m…
-
Hey probably best directed to @joe288 ,
I'm trying to use the useModulPower function standalone like plugging in the ESP board like an usb stick and have it rewrite the
Inverter Config.
Tried a…
-
Again offline
```python
Logger: homeassistant.components.sensor
Source: custom_components/growatt_server_api/sensor.py:44
Integration: Sensor (documentation, issues)
First occurred: 17:34:47 (1 o…
-
Have to say that this code works fine with this 6kw 3phase model. Only problem is that I can't get voltages from different phases.
Can I somehow scan all the messages that growat sends so I could c…
-
Hi,
I'm trying to figure out the correct registers for PV1 and PV2 Power since I want to use these values in my ESPHome device. I thought using the [RW Modbus] could tell me which registers to use.…