-
we need a way to enable and disable the heating element programmatically. i'm not sure how i've overlooked this, heh. i think a power MOSFET is the way to go, as a relay will both make noise and die a…
-
I have not been able to get the heat pump cooling portion to work. I have a 2 stage heat pump with a switching valve. If I remove the heat pump cooling portion everything works as it should but of cou…
-
It would be great to have 1-2 channels of heater control. This probably wants some sort of digipot/pwm + MOSFET combination. It needn't be fast, so sticking it on the i2c bus seems very sensible. T…
rwb27 updated
6 years ago
-
### Prerequisite
- [X] Yes, I've read the readme completely.
### Cache
- [X] Yes, I've cleaned accessory cache and the issue still exists.
### Version
v1.7.0-beta.54
### Device Infomation JSON F…
-
3D Printer ZoneStar Z9V5 Pro
Controller: ZM3E4
https://github.com/ZONESTAR3D/Control-Board/tree/main/32bit/ZM3E4
Configs:
https://github.com/Z9V5PRO/Z9V5Pro-MK4-Klipper
[printer]
…
-
I have the feeling that when the thermostat attempts to turn off the heater when it is unavailable (e.g. because of a connection issue) then it will leave it on forever. Is there a way, or perhaps sho…
-
Hi, thanks for the great project!
I set it up for my hardware and facing an issue: I need to control a fan.
The logic is the same as for the heater (apparently) because I connect it to a reversed …
-
@swingerman thanks for building this integration!
Is it possible to run 2 stage cooling just like you have implemented 2 stage heating?
Below is my code and I am using a an automation to contr…
-
### Checklist
- [X] I have filled out the template to the best of my ability.
- [X] This only contains 1 feature request (if you have multiple feature requests, open one feature request for each feat…
-
The controls for the pool/spa heat work correctly in home assistant, but in homekit there is no option to select heating or off within the climate/thermostat control. So The heating can only be turned…