-
Is it possible to add water pressure monitoring to this integration? The Laminox Idro has a built-in boiler with central heating water.
-
The entity for setting the leaving water temperature is not available.
The only climate entity's available are for deviation.
![2024-07-12](https://github.com/user-attachments/assets/ae513d96-f509…
-
### Before continuing...
- [X] I agree to follow Atlas' [Code of Conduct](https://github.com/Atlas-OS/.github/blob/main/profile/CODE_OF_CONDUCT.md)
- [X] I have searched our [issue tracker](https://g…
-
**Describe the bug**
- There's a temperature runway phenomenon in the thermal system. Temperature can up to positive infinity or go down to negative infinity.
- Within a short period of time (say w…
-
We should consider using https://developer.android.com/games/optimize/adpf to increase the clock speed during animations and reduce the vsync frequency when the thermal monitoring says we're heating t…
Hixie updated
4 months ago
-
It's possible to leave the heating element running in the HLT without water, which is bad. Should have a sensor to monitor unsafe heating and prevent meltdowns.
Possible sensor solutions:
- liquid…
-
We could plan multiple step using Ax parameters (or Bx ? if we have memory).
A step is composed of 2 variables
* Flags about active sensors and active function
* Time for that step
Example:
*…
-
Hello,
randomly I get the following error message. I use knutwurst custom firmware 1.5.3
I use a Anycubic MEGA X printer.
What could be the reason?
**Heating failed, system stopped! Heater_ID:…
anno0 updated
1 month ago
-
Typically for energy monitoring, it can be useful to plot Y versus X (e.g. heating consumption versus degree-days). Scada-LTS currently allows to plot on the same graph X and Y versus time.
Solutio…
-
## Your Environment
* Version used: openhab 4.0.2
In one of the latest Firmware-Upgrades (not sure when exactly it has been introduced) of the heatpump-controller the WebServer shows a new monitor…