-
Heating/cooling systems have different dynamics, as 'integrating processes' (by analogy to the PID model concept) where you can pre-heat or pre-cool to ride out periods of higher demand.
It would b…
-
[https://github.com/pnnl/ruleset-checking-tool/blob/develop/docs/ruleset_functions/baseline_systems/is_baseline_system_11.2.md?plain=1#L35](https://github.com/pnnl/ruleset-checking-tool/blob/develop/d…
-
@marianneURBED, can you please go through the list below and check if the values are correct?
The first 6 fields in each system were already there so should be ok, I had to add the others (central_…
-
Look at Peltier plates, brew belts, heat cable, lightbulb heater and assess suitability
-
![WAWeb screenshot](https://github.com/fishbaugher/WAweb-Issues/assets/169201030/44c39dad-ac4a-4162-9ce8-43d48174178b)
see the attached screenshot. I keep adding heating systems and then they are n…
-
We've received several of these errors. My gut tells me that this has to do with us passing multiple systems per type; however, this was not previously happening. Originally, if we sent more than one …
-
The SLPs by BDEW lead to erroneous results, when using them for district heating systems. In this [publication](https://www.sciencedirect.com/science/article/pii/S0306261922000551) we provide a set of…
-
## Describe the feature you'd like to see
Modeling of district heating systems could be a nice application for the model. In this context, I'd suggest to consider the following features:
- [ ] a…
-
It would be helpful not only add device support (grouping enities to a device), but also different heating units.
This does not necessarily mean that you have to enter an endless list of types. In my…
-
Currently we set `water_heater_num_units_served=1` without regard to what is sampled for "Water Heater In Unit" (Yes or No). Instead, should be using ResStockArguments to set `args['water_heater_num_u…