-
I want to add support for writing to the thermostat Junkers FW100 (e.g. change the room setpoint temperature), but I cannot find the telegram type that is used to write to the thermostat.
When I c…
-
edited for boiler->thermostat mixup
I have a CW400 thermostat with 1 heating circuit recognized as:
```
Thermostat: RC300/RC310/Moduline 3000/CW400/Sense II (DeviceID:0x10, ProductID:158, Version…
-
Helllo,
I have a new Condens 9000i with CW400.
EMS-ESP is detecting the following:
```
These 4 were recognized by EMS-ESP:
Boiler: Buderus Logamax plus/GB192/Bosch Condens GC9000 (DeviceID: …
-
My boiler: Bosch Condens 2500W
I have one error in the function **ems_setWarmTapWaterActivated(bool activated)**
I try to send manualy to boiler `8B 08 1D 00 5A 00 64 FF` with no result.
Is any …
-
My boiler is Buderus Logamax GB062.
EMS-ESP won't send any telegram after boiler detection.
It seems the problem is this piece of code:
```
// check to see if its a Junkers Heatronic …
-
Hello,
First of all: Thanks for the amazing work you have done on this project!
I own the following heating Components:
* Boiler: Junkers CerastarComfort ZWR 18-7 KE 23
* Thermostat: Junkers…