-
Assistance with getting items below operational with SuperMicro X12SAE-5, (Rocky8.9/Houston) - Thanks
![image](https://github.com/45Drives/cockpit-hardware/assets/169061810/54e64ff6-c9bf-4efc-84ea-…
-
Right now I'm sending time machine backups to my ASUSTOR 12-bay NAS, and while that works, it's a bit of a waste of all that NVMe storage, and it also means I have an extra little box running 24x7 to …
-
After unsuccessful SMB management attempts with winbind, a clean install of Ubuntu 20.04 LTS was performed due to familiarity.
Unable to open the tab "45Drives Disks" as I was able to in the origin…
0r1x updated
9 months ago
-
In my quest to max out the 10G link for my editing pool, I would like to investigate using an array of U.2 NVMe drives instead of the Samsung QVO SATA SSDs I'm currently using.
Parts I would need:
…
-
I installed nix on Proxmox using the det sys installer and received the following error during build. Am I holding it wrong?
```
root@hl15-10g1:~/git/disk-spinner# nix-build -E 'with import {}; c…
-
Hello 👋
Just received my HL15 recently and noticed that MOBO is not supported by cockpit software.
-
https://github.com/wovo/hwlib/blob/23d687944e7ce90c99c9c2b20f113cce3948c3f4/library/pins/hwlib-pin-all.hpp#L63
Looking at this line should the keyword final not be used? If this is omitted then a v…
-
X11SPH-nCTPF
Output from the pre-install on the full build option:
Unsupported Motherboard Model Detected
Motherboard Detected:
X11SPH-nCTPF
Support for X11SPH-nCTPF is not available at this …
0r1x updated
3 months ago
-
There are many `fruit` options for SMB that should help with macOS compatibility: https://www.mankier.com/8/vfs_fruit
Right now, when I try opening a Final Cut Pro project direct from the disk arra…
-
I would like to configure my Raspberry Pi 5 NAS (running on a 2.5 Gbps network connection) as a replication target for ZFS, so I have two local copies of all my important data.
It currently has 4x …