-
Hi,
I was troubleshooting some low level issues in an ISO session which turned out to be caused by a frequency offset problem.
This made me notice that this V2G plugin does not decode all of the H…
-
Hi,
I'm wondering, why go with USB camera when there are quite nice IP camera modules supporting pretty good resolution at 25 or 30 FPS and outputting rtsp stream? It's possible to get a small networ…
-
The struct `cm_mnbc_sound_indicate` is wrong.
It should be:
```c
typedef struct __packed cm_mnbc_sound_indicate
{
struct ethernet_hdr ethernet;
struct homeplug_fmi homeplug;
uint8_t APPLI…
-
will this util be supporting G.hn, or has it already done so? if not, are there G.hn utils somewhere?
new to HomePlug and G.hn.
-
two papers:
http://caia.swin.edu.au/reports/130121A/CAIA-TR-130121A.pdf
http://caia.swin.edu.au/reports/130417A/CAIA-TR-130417A.pdf
The discussion on netdev suggests using BQL, but at speed levels …
dtaht updated
10 years ago
-
I am wondering how fundamentally the tether communication works?
When we press the key (W) on keyboard, the port and starboard motors start to run.
what kind of control signal is generated and pass…
-
reference: http://openrov.com/forum/topics/automated-video-resolution-switching
With the new homeplug tether system. some users has now really high bandwidth, but the videostream remains the same.
Cou…
-
According to the published Homeplug specifications, in the result field of CM_SET_KEY.CNF, a value of 0 is success and 1 is failure. This is further reflected in Wireshark's decoder. However. my devic…
-
Hi!
I am using Fritz!Powerline 1220E and Fritz!Powerline 1260E under ubuntu 18.04 LTS.
CHIPSET FIRMWARE
QCA7500 MAC-QCA7500-2.5.0.37-00-20171218-CS
QCA7500 MAC-QCA7550-2.4.0.55-01-20170605-CS
…
-
Approximately 10 to 15 minutes into a live tv stream (from tvheadend) I get weird freezes in the video - audio is unaffected. The freezes are less than a second and repeat every 10 to 15s approximate…