-
### For a first basic (but complete) HPGe simulation we need the following features:
## `hit` tier
### HPGe dead layer model
- [x] extraction of detector positions from GDML (for DLs)
- [x] Cr…
-
We should investigate whether there is a simple way to roughly determine the distance of energy depositions from the HPGe surface. This would be very useful in post-processing to fold the activeness m…
-
We should make sure to handle the buffering / IO / memory usage of reboost. For example in our current (legacy) L-200 simulations stack often some processes use > 10 GB memory meaning few processes ca…
-
Need options for 11 and 15 HPGe to also account for when PACES is installed.
-
We should start planning for a serious validation suite, to be hopefully incorporated in our GitHub CI. The idea is to test all the microphysics in the simulation and compare to models/literature ever…
-
Add the mylar volume and the methods to handle the dynamic positioning of the mylar relative to the source.
-
Dear muchnoi,
I really enjoy your work! I tried to use your program with our detector from CAEN.
For that purpose I run your program on Windows 10 and changed therefore the Lib-calling to:
`dppli…
F4lko updated
4 years ago
-
I'll do some works about wave simulation for HPGe detector. I don't know how to use github, so this is a try.
-
Set up config template for eORCA12 @4.2.2
jdha updated
10 months ago
-
Need to change the data reported to the ones actually matched to the efficiencies measured in the acceptance testing. Speak to Evan about this. When we built this we had not accepted all HPGe, for som…