-
Hi there,
I have tried using this library on ESP8266 with P10 HUB12 LED Matrix, but it doesn't work as expected.
I use the example for "hello" with minimal modification. Here is the result:
![2…
-
Does it support HUB12?
-
I am trying to work with HUB12 matrices monochrome with P10 but they just do not work no matter what code I try the displays just respond the same they turn on all the LEDs. For example I tried this
…
-
Hub12 is very similar to Hub75, but the Output-enable has positive level (I think), and of course we can control many more panels with the outputs, as we only need Red or Red/Green and the free GPIO p…
-
Hi, I was red a lot of information about it, but I haven't any results.
My HUB12:
OE 1 2 A
N 3 4 B
N 5 6 F
N 7 8 S
N 9 10 L
N 11 12 R
N 13 14 F
N 15 16 F
I…
Czajo updated
7 years ago
-
I'm trying to get a P10 panel with HUB12 interface working and am almost there, but can't get the mapping quite right.
I'm using the adafruit matrix HAT and rewiring the HUB75 OE/GND/A/B/CLK/LAT/R …
-
Friends ,please share a correct procedure for interfacing the 32x16 p10 led module with the arduino mega.
hub12 configuration is
oE A
N B
N F
N S
N L
N R
N F
N F
Please …
AbeeB updated
4 years ago
-
The library doesn't work with HUB12 single color P10 panel. I tried with ESP32 DEVKITV1. I used correct pinout and example sketches, checked and re-checked everything several times, but no any of LEDs…
-
there are some diffrence between hub75 and hub12
-LED switch (managed by --led-inverse)-Thank you
-OE polarity
can you explain more about customizing codes to solve the problem? i think using inver…
-
https://github.com/adafruit/RGB-matrix-Panel/pull/62 mentions a new driver I just wrote.
http://marc.merlins.org/perso/arduino/post_2020-01-01_Running-FastLED_-Adafruit_GFX_-and-LEDMatrix-code-on-H…