-
### Description
Changing the motor direction from the user interface would be simplest, yet powerfull feature. To be precise: I've switched to dual drive extruder, so I have to change the E m…
-
Cant connect to my Anycubic i3 mega with klipper firmware. Please help...
log:
Changing monitoring state from "Offline" to "Opening serial connection"
Connecting to port /dev/ttyOcto4a, baudrate 23…
-
### Cura Version
5.7.2
### Operating System
Windows 10
### Printer
Anycubic i3 Mega
### Reproduction steps
I've upgraded from Cura 5.5.0 to 5.7.2 and encountered a problem with a …
-
When auto bed leveling, possibly as I have installed a larger carriage, the carriage hits the frame of the printer. This is additionally problematic as my bltouch probe is positioned on the right side…
-
### Bug Description
Error message thrown: "STOP called because of BLTouch error - restart with M999" after starting G29.
### Steps to Reproduce
1. Build i3 Mega with standard build-volume, i3…
-
### Bulging approximately from the 6th layer
### Steps to Reproduce
I made some upgrades to my Anycubic I3 Mega Pro:
1. Self-printed [Anycubic i3 Mega X-Carriage [MK4]](https://www.…
-
Hi all,
I am not very familiar with Github and hope you will forgive me if I ask my question here. I have not found out how to set the "help wanted" label.
Since yesterday I have a BL-Touch sen…
-
![img_20180415_131920](https://user-images.githubusercontent.com/38398270/38777963-6b2956de-40b1-11e8-823d-daef4a0e9232.jpg)
-
### Cura Version
5.7.2 and 5.8.0
### Operating System
Windows 10
### Printer
Anycubic I3 Mega S and Sovol SV 06
### Reproduction steps
In Cura 5.4.0, slicing still worked without errors. I inst…
-
### Description
I read on the wiki for the installation of the frimware but I wanted to install the MK4 cart present on thingverse.
This cart has different deltas for the BLTouch position an…