-
Hello, I cannot find the port name for the robot, which is A1. When I write **ifconfig** without any ethernet cables connected, that's what I get:
```
~$ ifconfig
enp4s0: flags=4099 mtu 1500
…
-
Hello, I have tested ~20 packages today and I found some interesting things about ip and ifconfig on iSH :
`ip route get 1` give me `ip: socket(AF_NETLINK,3,0): Invalid argument`
`ifconfig` give me…
bc1bb updated
1 month ago
-
Hello,
ifconfig is obsolete on Linux and should be replaced by ip. On some Linux distributions, ifconfig is no longer (pre)installed.
```
$ sudo meshtastic --tunnel
Connected to radio
INFO file…
-
I already submitted Feedback to Apple, but figured I would report things here too in case someone may discover a workaround.
macchanger worked without issues on macOS 14.3.1.
After updating to 1…
-
I was just going through your full-node guide, looking for some ideas on how to configure my network settings just right. I noticed that under the section about DCHP configurations, there is mention …
-
While running the command ifconfig in Kali Linux I am facing the following problem please help me to way out
ifconfig
Warning: cann…
-
It is desirable to manage VLANs as Linux does:
```shell
$ sudo ip link add link eth0 name eth0.111 type vlan id 111
$ sudo ip addr add 192.168.111.1/24 brd + dev eth0.111
$ sudo ip link set up dev…
-
I have builed rundb and rundl using makefile. When I try to run rundb, an assert cnt == g_total_node_cnt failed because cnt is the number of lines of ifconfig.txt file, but I don't know what is the co…
-
the `ifconfig` command is deprecated. It doesn't appear to be used much in our codebase, so it shouldn't take much to remove it.
-
Currently, ifconfig just shows the IP addresses and lets you configure just the IP addresses of network adapters. If you want to change the netmask or gateway you have to edit the source.
ifconfig…