-
I'm facing an issue with my ESP32 project where I'm unable to send temperature, humidity, and air quality data to Sinric Pro. The device connects to WiFi and Sinric Pro, but fails to send the data. Be…
-
Hey,
I have a problem uploading Retro-Audio using ESP32 dev board v4 and ILI9341 2.8" screen. After successful upload display shows only blank white screen. I also tested it using my other small sc…
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x] Update openHASP to the latest version
- [x] Reproduce the…
-
#### Type of Raspberry Pi
Raspberry Pi Zero W (2W)
#### Linux Kernel version
Raspberry Pi OS Lite (Bullseye and Bookworm)
#### Expected behaviour
It appears that the ILI9341**V** might …
-
A good day. Can you help with setting up the display on the Orange Pi 3G-Iot-A? If it will be on a paid basis, can you immediately name the price?
-
When i run the sudo ./fbcp-ili9341 command the screen gets a bit brighter but remains white. And i get a Bus Error.
```
pi@raspZero:~/fbcp-ili9341/build $ sudo ./fbcp-ili9341
bcm_host_get_periphe…
-
I'm using an ESP32, ILI9341, which I can control with fill back grounds, draw lines etc. I can read text files and display them from the SD card using Serial.print, but no matter what I try for JPEGs,…
-
Hello,
I have passed (lost) many time without success trying to get lvgl and micropython, or lv_micropython working on a CYS (Cheap Yellow Screen), ESP-2432s028, both touch and screen.
And I hav…
-
I need 2 different screen for 2 devices. Both bought here:
https://nl.aliexpress.com/item/32837085500.html?spm=a2g0o.order_list.order_list_main.5.17b579d2X3nRKb&gatewayAdapt=glo2nld
I have the 2.4" …
-
Hey!
Can you give a working example?