-
Fabio (#Fabio), 2022-08-05 21:46:26 UTC
INDI Library is an open source software to control astronomical equipment. It is based on the Instrument Neutral Distributed Interface…
-
Hi
A week ago, my Raspberry Pi 4 with Ubuntu updated to INDI 2.1.0, and the Moravian G2-8300 camera stopped working. When starting INDI, it loads all the equipment in the remote observatory setup e…
-
Hi,
Im using QHY174GPS as main camera (+ HYCFW3 filter wheel) and QHY5III290M for guidance. Both conected to Raspberry Pi 4B 8GB with AstroArch (with INDI and Kstars).
During a sesión some captu…
-
### Expected Behaviour
Stellarium should not crash when INDI server shuts down. A better approach would be to treat it like clicking "disconnect" in the telescope control panel.
### Actual Behavio…
-
Im using QHY174GPS camera + HYCFW3 filter wheel connected to a Raspberry Pi 4B 8GB with AstroArch (with INDI and Kstars). Camera and filter wheel controla and adquisición seems to be working well howe…
-
Now Stellarium has telescope control via INDI library. But INDI also supports a lot of astronomical cameras. It would be great to allow take images with them.
Also, now Stellarium can simulate view…
-
The indi-apogee crashes when connecting Apogee Alta F47 with V22 firmware. This was apparently known as it is mentioned by a review on the driver download page but as the camera is not supported anymo…
-
I am receiving a segfault with pyindi-client on Ubuntu 24.04. It appears to happen when attempting to download the BLOB from the indiserver.
OS: Ubuntu 24.04
Platform: x86_64
INDI: 2.0.8
Pyt…
-
Continuing my previous bug report which has been closed with the advice that I must install the latest indi first.
I had installed the latest indi - that is how I discovered I needed the third party…
-
Hi
I tried with much frustration to get this to work.
I was using the web server to -> config -> sensors and choose sensor A as the BME sensor to 280, on bus 77
I was able to check via a python …