-
if output of show ip route {prefix} contains BGP from as with dot notation. like "bgp 1.1" parser fails
-
2024-08-29 18:08:54,159: %UNICON-INFO: +++ svs-fc-dis-r-1-1 with via 'ssh': executing command 'show lisp instance-id 1 ipv4 map-cache 0.0.0.0/0' +++
show lisp instance-id 1 ipv4 map-cache 0.0.0.0/0
…
-
### Description of Issue/Question
I haven't been able to clear this error and looking for advise. The line the traceback is coming from :
net_scp_connect.send_command('y',
str…
-
Ping on cisco xe devices only output one ping and no ping ms info
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 23.133.168.1, timeout is 2 seconds:
Packet sent with a source …
-
If the output of `show interfaces` command contains any of the following output, the Genie parser will not parse those interfaces:
```
ucse1/0/1 is administratively down, line protocol is down
H…
-
Some prefix in the output may not contain CIDR notation, these are not retrieved by the parser:
0.0.0.0 {neighbor} 0 {path} i
10.0.0.0 {neighb…
-
Hi I have this JSON result from tacacs API..
```
{
"Cisco-IOS-XE-aaa:server": [
{
"name": "ISE1",
"address": {
"ipv4": "1.1.1.1"
…
ipeph updated
2 months ago
-
Hi,
since I am still new to terraform, I am not 100% certain if this is actually how its intended to work. So just close the issue if all works as designed.
When I do a
```
terraform import…
-
Hello,
We are using Genie in conjonction with PyATS for testing, but we saw that Genie was unable to work with SSID that is using space within it.
We have made some changes to our local library…
-
The *Python Loader Script* should upgrade the software on an IOS XE device to the *desired* software version (as configured/provisioned on the ZTP Server).