-
The iot-gate-imx8 device type supports uarts in either rs232 or rs485 mode. The SV can tell u-boot to alter the device-tree to the corresponding mode by setting either:
```uart_mode=rs232```
or
```…
-
Hello,
Getting RTC error on Compulab iot-gate-imx8 platform.
```
dmesg | grep rtc
[ 0.720390] rtc-abx80x 1-0069: model 1805, revision 2.3, lot 3f6, wafer 5, uid 6a8a
[ 0.721377] rtc-abx80…
-
**Describe the bug**
On particular Ubuntu machines, the installation steps to install gum through the apt package manager do not succeed due to a GPG error: `W: GPG error: https://repo.charm.sh/apt …
-
Device iot-gate-imx8 has only one release in the dashboard, balenaOS 2.71.5+rev6
This release includes a BSP script /etc/profile.d/resize.sh which does:
```
shopt -s checkwinsize
command -v resi…
-
Hello Matthias,
I have an issue configuratind the ufw rules for my comulab gateway. Maybe you can point me to the right direction.
I added a role "ufw"
![image](https://github.com/lueschem/ed…
-
I have tried to build bootloader as described in [r3.2 referred from compulab wiki page](https://github.com/compulab-yokneam/meta-bsp-imx8mm/blob/iot-gate-imx8_r3.2/Documentation/imx_boot_image_build…
-
Copy&Paste from https://github.com/balena-os/balena-intel/issues/218
We would like to have TPM 2.0 support in Balena on the Compulab Imx8 platform.
### Use Case
We're using TPM 2.0 modules to s…
-
Kirkstone released this may https://wiki.yoctoproject.org/wiki/Releases.
Is there any ETA when this layer support that release?
-
Hi,
Do you already have a plan for the Kirkstone release? We would like to beta test also if possible. Thanks a lot 🍻
Kind regards,
Jeppe
-
"-A arm" is fixed, but shoud be:
switch (edi_bootstrap_architecture) {
case "armhf":
"arm"
case "arm64":
"arm64"
default: fail
}
ghost updated
3 years ago