-
Hi,
I've seen the J1939 conversation come up here several times... Any chance such an improvement would be considered? Has anyone tried to implement it?
Thanks,
PS: glad to see this project is b…
-
Hello, hopefully a simple question, but I didn't find any info online. I logged J1939 data from a heavy-duty US-based vehicle using a CSS Electronics CL2000, and I have loaded and interpreted the dat…
-
Looking for some assistance here - I am trying to create a simple program to send a j1939 message on a vcan interface.
My goals:
- bind() socket to name 0x1 and address 0x80
- use sendto() to sen…
-
Provide consistent report directory policy between the J1939-84 and IUMPR products.
Please mimic the directory policies employed by J1939-84 in IUMPR.
I.E. Remember the file location last select…
-
If the J1939 Addon is used to read a J1939 message(>8 bytes) peer to peer, the addon can't read the message. The reason is that the add-on can't respond correctly to TP.CM RTS based on the J1939 speci…
-
**Feature Request:** On the ‘CAN / CAN FD Transmit’ window, if a message is a multiplexed message, only display the signals for the specified multiplex value. Currently all the signals are shown which…
-
Hi, I have a modified version of your driver working with an ODB2 MX+ reading data from a Ford F53 RV Chassis. I added commands to read the vehicle information and DTCs.
We switched from a Gasol…
-
A user was asking me offline whether Eclipse Leda supports J1939 communication.
I couldn't answer, as I am not familiar with the protocol stack.
It looks very similar to CAN itself, or may even be…
-
Add Function Blocks for SAE J1939 or ISO 11783 Message Reception
# List
| | | | Symbol …
-
Hello! Recently I decided to update the application and found that it does not display J1939 signals on the charts. Signals from the custom DBC are displayed on the charts. I think this is due to the …