-
Hey Jay,
Awesome project you have here. I just wanted to let you know we are going to be removing custom 128bit UUID's from our advertising data. On line 357 you are looking for advertising of the…
-
Channel 0 RXD ( or TX from the Kickr) seems to follow 7 bytes (correct term?), pause about 0.3 seconds, then 0xA2, pause about 0.6 seconds, another 7 bytes, pause, 0xA2, etc. Edit: though occasionally…
-
Useful to avoid using bluetooth and also for research.
-
Shift up/down buttons on Zwift Play controllers don't seem to be recognized - no change to Gears panel display or trainer resistance. Also, speed displayed on QZ is 1/2 speed displayed on Rouvy screen…
-
Hey,
I'm new to github, so sorry if this is not an "issue".
I tested your code @ddimmich and i could get it running on a Pi3.
There is data coming from the Kickr: "36: b'34000000000003000000cda…
-
**Describe the bug**
I have a KICKR v3 and a KICKR v4. On the v4, the cadence is displayed correctly. On the v3, the cadence is about 10-15rpm higher than what I am actually pedaling. When I connect …
-
iPad mini 6 can't connect (tried with zwift, rouvy) to this app running on a Samsung S8, while a 2016 ipad pro can. Both iPads are running iOS 15.1. As usual my macbook pro also connects fine.
The …
-
Wahoo developed a unit that connects to their trainers and provides BLE FTMS over IP.
Most apps are now supporting it and Zwift has finally followed suit.
The service is broadcast on MDNS like…
-
I'm wondering if anyone has thought of implementing the BLE FTMS over TCI/IP that the Wahoo Direct Connect serves up?
It seems like this is probably a direction that trainers in the future may su…
-
**Describe the bug**
I configured the gear gain to 0.1. If I increase shifting starting from 1.0 there is more or less not noticeable resistance up to 2.9.
Shifting from 2.9 to 3.0 there is a majo…