-
My KISS FC V2 hasn't been working properly. I plug it into the computer, the light turns green, go to KISS GUI v2.0.27 hit the connect button, it says it's connected but still only has the green light…
-
Setup:
Kiss FC V1 (latest firmware)
Steele PDB (latest 2.5 firmware)
FrSky X4r
I keep seeing "no connection to kiss fc" on the bottom of the screen after boot up. No amount of flashing or wiri…
-
## Current Behavior
When i try to enumerate devices on crossfire network, i get no responses from ERLS endpoint.
Most likely it doesnt respond or filter packets for some reason.
Broadcast messa…
-
Fresh build only hovered. At first I had reading in my osd when I was finishing. I go to actually fly and now at the bottom of my osd it reads "no connection to kiss fc" I've tried Reflashing, I've ch…
-
As is can read at the homepage of ImmersionRC Ghost was not supported by KISS I am a "Ghost" owner - and i grabbed through the internet and found a YT video where "flyduiono kisses a ImmersionRC Ghost…
-
Could you please help me find the way to have possibility of turning off/on LED strips connected to Wolf PDB using my Taranis QX7S switches or knobs?
Setup: Wolf Reverb PDB OSD Kit rev 2, Kiss FC v2…
-
I am trying to setup Kiss LUA script for Taranis X9D+ with kiss FC v1.03 and Mr Steele PDB.
I have TBS Unify HV, PDB is soldered for 7v and I have smart audio running from Unify to Audio on the St…
-
Kiss FC V2 & Fettec Kiss FC. Very often Motors don't spin up. Everything double-checked and the GUI shows the motors spinning up but they don't.
-
Was not able to flash ESC in the kiss-gui_2.0.27.
Kiss FC v1 is on rc45y.
After using the ESC Flasher TAB it tolde me "no response from FC!"
-
I have tried to connect a new Fettec FC to MacOS - but without success. A KissCC and a KissFC V1 are able to connect.
I have a Win7 Installation on this Macbook and tried to connect with success -…