-
Please add macros for X-axis_twist_compensation
https://github.com/Klipper3d/klipper/pull/6624#issuecomment-2420026334
-
### Is your feature request related to a problem? Please describe
Adding accelerometer requires manual packages installation
### Describe the solution you'd like
kiauh could offer an option to inst…
-
BED MESH default profile not load
According to klipper config changes...
https://www.klipper3d.org/Config_Changes.html
It is recommended that users who use the default profile add BED_MESH_PROF…
-
Klipper recently implemented a correction which allows changing pressure advance on the fly without blobs or print defects:
https://github.com/Klipper3d/klipper/pull/6635
Thanks to it, a feature o…
-
Has anyone gotten the 5m to work with an eddy sensor?
https://github.com/bigtreetech/Eddy/
It's integrated into klipper mainline, but I know we are running a few revs behind. https://github.com/Kl…
-
### Is your feature request related to a problem? Please describe
It's related to github's routing issue of August 14th 2024, I kindly request to have another advanced option for local installation i…
-
Installation process of this Armbian:
- Download the image you like
- Install in the SD Card or eMMC via [BalenaEtcher](https://www.balena.io/etcher)
- Check the size of the system partition, may…
-
### Is your feature request related to a problem? Please describe.
As of right now, pressure advance tuning can be a bit tedious for those wanting more precision e.g. every layer changes the pa val…
-
Configure endstops to shutdown the machine when triggered during normal operation.
dalegaard said:
See e.g. #2628 and #3235 on the issue tracker
https://github.com/Klipper3d/klipper/issue…
-
Wouldn't be nice to see direct Klipper support a-la https://github.com/Klipper3d/klipper/tree/work-mechaduino-20181205 (link edited...)