-
We assume port 20408 already for coordinator and client, however not for the exporter. I suggest we check if the line mentioned below checks for a port, and if it does not exists, add port 20408.
h…
-
In our GitLab CI workflows, we encounter issues with tests running longer than expected, leading to job timeouts and unintended interruptions. We propose adding a timeout parameter to the `labgrid-cli…
-
When creating an env config with wrong SerialDriver bindings, a completely unrelated error happens:
```python
$ labgrid-client con …
-
## Feature
The system shall be integrated into labgrid functionality, i.e that the functionally is wrapped by the labgrid provider interface. This allows access to the led state via the labgrid syste…
-
- [x] write a driver, resource, protocol for a own mqtt broker
- [x] add all server scripts to repo (auto deploy)
- [x] documentation
12rcu updated
2 years ago
-
Story: I'm using `labgrid-client -p console` to connect to a place. From **within the console window**, I want to trigger a power on/off/cycle (e.g. the equivalent of callling `labgrid-client -p po…
-
I have a zynq_zybo board which has a built-in UART, connected to my lab server via a micro-USB cable. The UART appears when the board powers on and goes away when not.
At present I am seeing this o…
sjg20 updated
2 months ago
-
After setting up the docker version of Labgrid client, I got the error below when I tried to run "labgrid-client --help".
```
root@866a8fc39706:/opt# labgrid-client --help
Traceback (most recen…
-
For tegra boards (and also Samsung) I need to a reset sequence like this:
- assert reset
- assert recovery
- de-assert reset
- de-assert recovery
For some boards I have reset and recovery on …
sjg20 updated
3 weeks ago
-
I would like to be able to tell the U-Boot strategy what to do at runtime, e.g.:
1. just start up the board and connect a console
2. write U-Boot to the board, then do 1
3. build U-Boot and then …
sjg20 updated
2 months ago