-
When laser cutting laser energy should not be in the motor acceleration and deceleration stage output se…
-
Hey, so i laser cut the Iris PE Switch Plate Mx 3mm and after receiving it my stabilizers & the switches fall through the thumb area because the space it too large. The shop did not enlarge that area.…
-
3D printable enclosure with a bottom and top part
* [ ] Bottom completely closed
* [ ] Bottom with open view to the PCB art
* [ ] Top with cutout for easy access to the jumpers and parts
* [ ] Top…
-
Do you have any advice for someone in the United States for modifying the design to accommodate the sizes of acrylic sheet that are available here? It turns out that 4.5 mm and 9 mm are the most commo…
-
Go to Bechtel with Kayla probably
-
I couldn't find the required settings to configure jscut for laser cutting along the path instead of outside the path.
-
make hole mount for servo
add top mounting holes for pcb
add hole for button
holes for pots
-
Is there a way to make the laser slightly overlap the cut end and begin points?
Should only have to be the width of the laser beam.
So as an example:
Current: Cutting a 2" circle, the laser would tr…
-
https://www.thingiverse.com/thing:6593/apps
[Chess_set_derivative_with_jigsaw_chessboar…
-
I can open the SVGedit file in Inkscape, set the stroke color and line width since they appear unset to Inkscape, and after saving from Inkscape the process of opening in Illustrator and printing to t…