-
### Your GTNH Discord Username
MIAOW246
### Your Pack Version
2.7.0 beta2
### Your Proposal
This is the scanning tree right now, i think this is too not linear and just does not feel ri…
-
**Is your feature request related to a problem? Please describe.**
I have two printers in the office with scanning functionality, inkjet for color and laser for black. I only typically use the laser …
-
LOQ could be a useful candidate as a SANS beamline which also does continuous-motion scanning (for the laser) and also isn't usually 100% scheduled as far as I know so may be easier to get beamtime on…
-
The ydlidar_ros2_driver_node provides two services /stop_scan and /start_scan which turn off/on the laser respectively. The main loop always attempts doProcessSimpleScan().
When the laser has be…
-
https://doi.org/10.1093/forestry/cpae030
-
On page 120-121, it says
> However, the organization of the point cloud no longer holds in the case of non-repeated pattern solid-state, flash LiDARs, or mechanically rotating LiDAR under motion di…
-
https://doi.org/10.1016/j.srs.2024.100160
-
**Somebody reported on Sourceforge [[tickets:#152](https://sourceforge.net/p/oorienteering/tickets/152)]:**
it would be nice to have a smoothing function for contours generated with laser scanning da…
dg0yt updated
9 years ago
-
I successfully install and run examples from YDLidar_SDK and ydlidar_launch.py in ydlidar_ros2_driver, but I got error when I run the ydlidar_launch_view.py.
The output:
[INFO] [ydlidar_ros2_dri…
-
I am using the CameraBarcodeReaderView(Zxing) in my xaml for barcodesDetected. We also use laser scan for scanning. Laser scan is working until the zxing is triggered. Once zxing is used, laser scan s…