-
The example in the Wiki connects only via Bluetooth. With the following attachment, we can add the functionality of the sensor connected to a Seeed Xiao ESP32_S3 Sense with camera.
```
# Configura…
-
Hi,
Thanks for this lib, but I have an issue in my use case, where I want to stop the polling if the presence GPIO is active and only start polling when presence detected, to sense subsequent movem…
-
### The problem
Since update to 2024.6.1 ld2410_ble is stuck on initializing
### What version of Home Assistant Core has the issue?
core-2024.6.1
### What was the last working version of Home Assi…
-
### The problem
Since last esphome update my 8 LD2410 Sensor became with unknown state on all sensor LD2410 Sensor.
I was able to get 3 working, by upload several times de yaml code, but the others …
-
Hi, Daniel
Thank you so much for this great project. I install your project in 15 minutes without any problem.
3 questions:
1) Is it possible to make a climate card looks like a HA card?
2) I try …
-
### The problem
If I write the number in yaml about LD2410, it can't connect HA API.
number:
- platform: ld2410
timeout:
name: timeout
light_threshold:
name: light thre…
-
### The problem
I have 3 template/config numeric values in my yaml. That randomly get reset to their initial value. The reason I say randomly is because if manually reboot my node or ha the value rem…
-
### The problem
I have two LD2410C sensors connected to one ESP32, of which only one works. I have ruled out wiring issues and broken sensors by swapping everything out, so I think it's a software …
-
### Is your feature request related to a problem? Please describe.
Hi and thank you for your great effort in making the best BLE tracker. Is it possible to use the LD2410 BLE as a radar sensor
Sinc…
-
for some reason,we have to use the soft Serial port ,It does not support 256000