-
The OTA updater should disable the LED pattern generator, then display the percentage on the LEDs with the new LEDs fading in as the % complete increases. Every 8% would cause one more LED to be lit.
-
I was able to figure out parts of how the LCD display is used.
Long story short, it's just as dumb as the rest of the device - the MPC software actually renders the entire content of the display an…
-
After flashing the latest 3.1.1 firmware, I had the display and LED working at normal levels, and now the display has gone completely off, and the LEDs are at a low brightness level
![image](https:…
-
### Describe the bug
Home Assistant / Music Assistant has a built-in LMS server that allows using slimproto clients to play the audio directly from HA. Seems that some communication that comes from…
-
-
**Is your feature request related to a problem? Please describe.**
When the OS boots up, we don't have adequate indicators about the state of the boot, the liveness of the OS, and the readiness of th…
-
**Printer type** - MK4
**Optional upgrades** - custom settings for under display led light
It would be nice to have a options to set own colors and states (flashing,static) and intesity of led lig…
-
The tutorial leads the LED to blink and connect to GPIO 13. After configuration and gds, the GPIO fails to open everytime and displays an error on GPIO 6. The RateGroups also display warnings and the …
-
Seems to be a recurring issue with this driver. I'm sorry if this has been covered before. I'm an amateur when it comes to embedded and it's my first time doing it.
I have a Pi Pico with a Pimoroni…
-
**Describe the bug**
Display blanks out randomly. Can be restarted with sb-restart command. Where are these commands located? Are they sim links?
**Logs**
https://paste.ubuntu.com/p/zRvrkCPdVs…